877-486-1454
Home Knowledge Centers > Kwik-Lok® Pins Knowledge Center > Lanyard Ordering Guide

Knowledge Center

Kwik-Lok® Pins

Knowledge Center

Kwik-Lok® Pins

Lanyard Ordering Guide

Jergens Kwik-Lok® Pin lanyards are available to order attached to a pin (pin purchase neccesary) or can be purchased individually.

Ordering Lanyards Attached to Kwik-Lok® Pins 

1. To order Kwik-Lok® Pins with attached lanyard (tab) (fig. 1). Specify the six digit pin part number followed by two letters. The first letter designates the length of the lanyard and type of tab. The second letter designates the size of the hole in the tab for the mounting screw. 
Example A:
Aluminum T-Handle Kwik-Lok® Pin 1/2" x 1.0" (801082) and attached 8" lanyard with Round Stainless Steel Tab with 0.257 (6.5 mm) mounting hole diameter = Part Number 801082CR

2. To order Kwik-Lok® Pins with attached lanyard (2 loops or (fig. 2) loop/eyelet (fig. 3)) Specify the six digit pin part number followed by two letters. The letters designate the length of the lanyard and if 2 loops or loop/eyelet variation (as well as mounting screw size).
Example B:
Stainless Steel L-Handle Kwik-Lok® Pin 1" x 6" (805775) and attached 24" lanyard with 2 loops = Part Number 805775EH
Example C:
Stainless Steel Button Handle Kwik-Lok® Pin 6mm x 40mm (855417) and attached 10" lanyard with loop/eyelet for M5 screws = Part Number 855417HD

LANYARD WITH A TAB (FIG 1)
Length Round Stainless Steel Tab Oval
Aluminum Tab
4 In 102 mm A M
6 In 152 mm B N
8 In 203 mm C P
10 In 254 mm D Q
12 In 305 mm H R
16 In 406 mm J S
20 In 508 mm K T
24 In 610 mm L U
TABLE 1 TAB HOLE SIZE
Length Tab Hole Diameter
0.131 In 3.3 mm P
0.196 In 4.9 mm Q
0.257 In 6.5 mm R
0.283 In † 7.1 mm † S
0.320 In † 8.1 mm † T
0.379 In † 9.6 mm † U
0.406 In † 10.3 mm † V
0.468 In † 11.8 mm † W
0.515 In † 13.1 mm † Y
 † Note: These sizes only available in stainless steel round tabs.
LANYARD WITHOUT A TAB
Length 2 Loops 1 Loop (Pin)
4 In 102 mm EA FA
6 In 152 mm EB FB
8 In 203 mm EC FC
10 In 254 mm ED FD
12 In 305 mm EE FE
16 In 406 mm EF FF
20 In 508 mm EG FG
24 In 610 mm EH FH
LANYARD LOOP/EYELET (FIG 4)
Screw Size
#10 M5
0.131 3.3
0.196 4.9
0.257 6.5
0.283 7.1
0.320 8.1
0.379 9.6
0.406 10.3
0.468 11.8
0.515 13.1

 

Ordering Lanyards WITHOUT PIN

To order Kwik-Lok® Pins SEPARATELY (WITHOUT PIN) For lanyards without pins, specify the six digit pin number followed by the hole size letter from table 1.
Example D:
24" lanyard with stainless steel round tab and mounting hole diameter of 0.406" = Part Number 890074V

Note: Split rings are not included when attaching lanyards, unless customer specified. In that case, add an R as a third letter to the extension. 

LANYARD WITH A TAB (FIG 1)
Length Round Stainless Steel Tab Oval
Aluminum Tab
4 In 102 mm 890054 890104
6 In 152 mm 890056 890106
8 In 203 mm 890058 890108
10 In 254 mm 890060 890110
12 In 305 mm 890062 890112
16 In 406 mm 890066 890116
20 In 508 mm 890070 890120
24 In 610 mm 890074 890124
TABLE 1 TAB HOLE SIZE
Length Tab Hole Diameter
0.131 In 3.3 mm P
0.196 In 4.9 mm Q
0.257 In 6.5 mm R
0.283 In † 7.1 mm † S
0.320 In † 8.1 mm † T
0.379 In † 9.6 mm † U
0.406 In † 10.3 mm † V
0.468 In † 11.8 mm † W
0.515 In † 13.1 mm † Y
 † Note: These sizes only available in stainless steel round tabs.
LANYARD WITHOUT A TAB
Length 2 Loops 1 Loop (Pin)
4 In 102 mm 890204 890254
6 In 152 mm 890206 890256
8 In 203 mm 890208 890258
10 In 254 mm 890210 890260
12 In 305 mm 890212 890262
16 In 406 mm 890216 890266
20 In 508 mm 890220 890270
24 In 610 mm 890224 890274
LANYARD LOOP/EYELET (FIG 4)
Screw Size
#10 M5
890304 890404
890306 890406
890608 890408
890310 890410
890312 890412
890316 890416
890320 890420
890324 890424