Kwik-Lok® Pin Material Specifications
Jergens Kwik-Lok® Pins are designed and manufactured to meet or exceed these standards.
Heat Treatment: 17-4 PH Stainless Steel: Condition H-900, Rockwell C40 Min per MIL-H-6875
Surface Treatment: CRES Parts: Passivate per AMS-QQ-P-35
Aluminum Alloy Parts: Anodize per MIL-A-8625 Type I or II per MIL-C-5541 Class 1A
Aluminum Handles: Color Black
Kwik-Lok® Pins
|
|
*Locking Balls also available in 302 Stainless Steel by special order. Actual locking element tensile strength is reduced by lower strength alloys. Ordering special pins with 4 balls will increase locking element tensile strength above NAS
Kwik-Lok® Detent Pins
Component | Material |
---|---|
Bodies (shank) | CRES 17-4 PH Stainless Steel |
Balls | CRES 440C Stainless Steel* |
Buttons | CRES 17-4 PH Stainless Steel |
Springs | CRES 302 Stainless Steel |
*Locking Balls also available in 302 Stainless Steel by special order. Actual locking element tensile strength is reduced by lower strength alloys. Ordering special pins with 4 balls will increase locking element tensile strength above NAS
Double Shear Resistance Minimum
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
*Double shear values are the minimum requirements according to NAS functionality tests. † Locking element tensile strength values are the minimum requirements of NAS functionality tests. Pins may be special ordered with 4 locking balls for additional locking element tensile strength. |
![]() |
AS9100:2016 Certification |