Modular Workholding

Support, Locate, and Hold

Jergens unique Modular Workholding system’s design offers maximum flexibility. The line has a variety of subplates, risers, quick-change pallets, and top tooling to get the spindle and cutting tool close to the workpiece.

Ball Lock® Components

Fixture Plates

Quick Change Kits

Subplates

Jergens Ball Lock® Mounting System continues to be the standard for performance & quality in quick-change mounting and fixturing. Ball Lock® provides a proven method to quickly and accurately locate and lock fixtures onto machine tables and subplates. It is the single most cost-efficient and versatile fixturing system for horizontal and vertical machining centers.

ZPS Fixture Plates and Machinable Blanks

ZPS Flange-Type Modules

ZPS Installation Clamping Modules

ZPS Pneumatic Subplates

ZPS Studs, Screws & Keys

ZPS Surface Mounted Clamping Modules

Jergens Zero Point System allows you to fix, position, and clamp in a single step, cutting set up times by up to 90%. Available with either pneumatic or hydraulic release, these positive locking and locating modules allow operators to quickly change out large and small fixtures with extreme accuracy and minimal effort.

Quick-Loc™ Cubes & Twin Bases

Quick-Loc™ Integrated Risers

Quick-Loc™ Receivers

Quick-Loc™ Reduction Receivers

Quick-Loc™ Rotary Receivers

Quick-Loc™ Studs, Plugs & Keys

Quick-Loc™ Support Pallets

Jergens Quick-Loc™ is a modular quick change system that lets users achieve fast and repeatable fixture changes. The system allows for various types of top tooling to be interchanged on base receivers. The basis of the system is a 4-pull stud interface on either a 52mm or 96mm grid pattern. Top tooling is located and clamped to a base receiver in a single step when the pull studs are inserted into the receiver and the clamping screw is tightened.

Clamps and Accessories

Cylinders

Hydraulic Clamps

Pumps and Boosters

Work Support

Jergens Power Workholding is durable, reliable, and provides users with a cost-effective and fatigue-free performance. With a wide selection of boosters, clamps, cylinders, pumps, swing cylinders, and hydraulic controls, these solutions provide more control for a wide range of applications.

Starter Kits

Jergens Pre-Engineered Kits are designed for use with a variety of machining centers, rotary tables, and trunnion tables. It doesn't get easier!

OK-Vise® Blank System

OK-Vise® Clamps

OK-Vise® Grid System

OK-Vise® RM Rail System

Jergens OK-Vise® brings 3-dimensional machining to your workflow, extend cycle time, and provide a more efficient usage of space compared to traditional vises. Our wide range of low-profile clamping products are designed for even the most unique applications.

Ball Lock® Tooling Columns

Production Tooling Columns

Cast Iron Tooling Columns

Jergens Tooling Columns are fully customizable to provide the optimum workholding solution for your unique application. Incorporate one of our industry-leading “Quick-Change” systems, including Ball Lock® and ZPS, for maximum productivity.

5-Axis Vises

Production Vises

Jergens Vises & Top Tooling include a variety of exceptionally powerful clamping methods, from dovetail vises to self-centering vises specially designed for 5-axis workholding applications and ER collets.

5-Axis Base Elements

5-Axis Components & Accessories

5-Axis Risers

Jergens 5-Axis Subplates & Risers are a truly modular approach to 5-axis machining. Our subplate system allows users to quickly and accurately locate and exchange fixtures while our risers allow users to increase their machining envelope by raising, positioning, and locating their part.

Ball Lock®

Ball Lock® Components

Fixture Plates

Quick Change Kits

Subplates

Jergens Ball Lock® Mounting System continues to be the standard for performance & quality in quick-change mounting and fixturing. Ball Lock® provides a proven method to quickly and accurately locate and lock fixtures onto machine tables and subplates. It is the single most cost-efficient and versatile fixturing system for horizontal and vertical machining centers.

Zero Point System

ZPS Fixture Plates and Machinable Blanks

ZPS Flange-Type Modules

ZPS Installation Clamping Modules

ZPS Pneumatic Subplates

ZPS Studs, Screws & Keys

ZPS Surface Mounted Clamping Modules

Jergens Zero Point System allows you to fix, position, and clamp in a single step, cutting set up times by up to 90%. Available with either pneumatic or hydraulic release, these positive locking and locating modules allow operators to quickly change out large and small fixtures with extreme accuracy and minimal effort.

Quick-Loc™

Quick-Loc™ Cubes & Twin Bases

Quick-Loc™ Integrated Risers

Quick-Loc™ Receivers

Quick-Loc™ Reduction Receivers

Quick-Loc™ Rotary Receivers

Quick-Loc™ Studs, Plugs & Keys

Quick-Loc™ Support Pallets

Jergens Quick-Loc™ is a modular quick change system that lets users achieve fast and repeatable fixture changes. The system allows for various types of top tooling to be interchanged on base receivers. The basis of the system is a 4-pull stud interface on either a 52mm or 96mm grid pattern. Top tooling is located and clamped to a base receiver in a single step when the pull studs are inserted into the receiver and the clamping screw is tightened.

Power Workholding

Clamps and Accessories

Cylinders

Hydraulic Clamps

Pumps and Boosters

Work Support

Jergens Power Workholding is durable, reliable, and provides users with a cost-effective and fatigue-free performance. With a wide selection of boosters, clamps, cylinders, pumps, swing cylinders, and hydraulic controls, these solutions provide more control for a wide range of applications.

Pre-Engineered Kits

Starter Kits

Jergens Pre-Engineered Kits are designed for use with a variety of machining centers, rotary tables, and trunnion tables. It doesn't get easier!

OK-Vise®

OK-Vise® Blank System

OK-Vise® Clamps

OK-Vise® Grid System

OK-Vise® RM Rail System

Jergens OK-Vise® brings 3-dimensional machining to your workflow, extend cycle time, and provide a more efficient usage of space compared to traditional vises. Our wide range of low-profile clamping products are designed for even the most unique applications.

Tooling Columns

Ball Lock® Tooling Columns

Production Tooling Columns

Cast Iron Tooling Columns

Jergens Tooling Columns are fully customizable to provide the optimum workholding solution for your unique application. Incorporate one of our industry-leading “Quick-Change” systems, including Ball Lock® and ZPS, for maximum productivity.

Vises & Top Tooling

5-Axis Vises

Production Vises

Jergens Vises & Top Tooling include a variety of exceptionally powerful clamping methods, from dovetail vises to self-centering vises specially designed for 5-axis workholding applications and ER collets.

5-Axis Subplates & Risers

5-Axis Base Elements

5-Axis Components & Accessories

5-Axis Risers

Jergens 5-Axis Subplates & Risers are a truly modular approach to 5-axis machining. Our subplate system allows users to quickly and accurately locate and exchange fixtures while our risers allow users to increase their machining envelope by raising, positioning, and locating their part.