Stainless Steel Ball Lock® Back Mount Receiver Bushings
Jergens Stainless Steel Ball Lock® Back Mount Receiver Bushings are used in through hole applications (Light Press Fit).
Features, Benefits, & Product Specifications:
- Material: 17-4 PH Stainless Steel
- Heat Treat: 40-45 RC
Note(s):
-
Installed bushings should be approximately 0.012" (0.3mm) below subplate surface.
-
To alleviate the possibility of binding the shank in the bore, the maximum interference fit between bore and bushing O.D. should not exceed 0.0005" (0.013mm).
BallLock Back Mount Receiver Bushing_LineArt
Stainless Steel Ball Lock® Back Mount Receiver Bushings
| Part Number | CAD | Unit | Shank Diameter (mm) | Outside Diameter +0.0000/-0.0004 A (in) | Depth +0.000/-0.002 B (in) | Counter Bore +/-0.006 C (In) | Minimum Subplate Thickness D (in) | |
|---|---|---|---|---|---|---|---|---|
| 49511SS |
|
Inch | 20 | 1.0950 | 0.345 | 1.280 | 7/8 | |
| 49512SS |
|
Inch | 25 | 1.3763 | 0.416 | 1.593 | 1 | |
| 49516SS |
|
Inch | 13 | 0.7870 | 0.277 | 1.000 | 3/4 | |
| 49517SS |
|
Inch | 16 | 0.8760 | 0.285 | 1.155 | 3/5 |
| Part Number | CAD | Unit | Shank Diameter (mm) | Outside Diameter +0.04/+0.03 A (mm) | Depth +/-0.025 B (mm) | Counter Bore +/-0.15 C (mm) | Minimum Subplate Thickness D (in) | |
|---|---|---|---|---|---|---|---|---|
| 49561SS |
|
Metric | 20 | 28 | 8.74 | 33.00 | 25 | |
| 49562SS |
|
Metric | 25 | 35 | 10.54 | 41.00 | 25 | |
| 49563SS |
|
Metric | 30 | 42 | 10.95 | 49.00 | 30 | |
| 49566SS |
|
Metric | 13 | 20 | 6.92 | 26.00 | 20 | |
| 49567SS |
|
Metric | 16 | 22 | 7.24 | 29.00 | 20 |
Related Products
-
Stainless Steel Ball Lock® Shanks
-
Stainless Steel Ball Lock® Liners
-
Stainless Steel Ball Lock® Face Mount...
