Tab Dimensions – Inch
Tab Style | +/-0.005 ØA | +/-0.01 B | +/-0.02 C | +/-0.02 D | +/-0.005 ØE | +/-0.016 Radius | +/-0.01 F | +/-5 deg. G | +/-0.01 T | Material |
Round Tab | See Table 1 | 0.688 | 1.316 | 1.004 | 0.125 | 0.160 | 0.406 | 12 | 0.048 | 300 Series Stain, Steel |
Oval Tab | See Table 1 | 0.375 | 1.130 | 0.945 | 0.125 | _ | 0.500 | 12 | 0.06 | Aluminum |
Ordering Lanyards Attached to Pins
Lanyard with a Tab (Fig. 1) | |||
Length | Round Tab | Oval Tab |
inch | mm | Stainless Steel | Aluminum |
4 | 102 | (Pin#) A* | (Pin#) M* |
6 | 152 | B* | N* |
8 | 203 | C* | P* |
10 | 254 | D* | Q* |
12 | 305 | H* | R* |
16 | 406 | J* | S* |
20 | 508 | K* | T* |
24 | 610 | L* | U* |
Substitute the asterist (*) with the proper hole size letter from Table 1.
Table 1 Tab Hole Size |
Tab Mounting Hole Diameter |
Inch | mm | Size Letter |
0.131 | 3.3 | P |
0.196 | 4.9 | Q |
0.257 | 6.5 | R |
0.283† | 7.1† | S |
0.320† | 8.1† | T |
0.379† | 9.6† | U |
0.406† | 10.3† | V |
0.468† | 11.8† | W |
0.515† | 13.1† | Y |
(†) These sizes only available in stainless steel round tabs.
Lanyard with a Tab (Fig. 1) | |||
Length | 2 Loops | 1 Loops (Pin) | |
inch | mm | (Fig. 2) | (Fig. 3) |
4 | 102 | (Pin#)EA | (Pin#)FA |
6 | 152 | EB | FB |
8 | 203 | EC | FC |
10 | 254 | ED | FD |
12 | 305 | EE | FE |
16 | 406 | EF | FF |
20 | 508 | EG | FG |
24 | 610 | EH | FH |
Lanyard Loop/Eyelet (Fig. 4) | |
For Screw Size | |
#10 | M5 |
(Pin#)GA | (Pin#)HA |
GB | HB |
GC | HC |
GD | HD |
GE | HE |
GF | HF |
GG | HG |
GH | HH |
Part Numbering:
Lanyards with Tab, attached to Pins
Lanyards with 2 loops, 1 loop, or loop/eyelet
Note: Split rings are not included when attaching lanyards, unless customer specified. In that case add an R as a third letter to the extension.
Ordering Lanyards When Supplied Separately Without Pins
Lanyards with Tab (Fig. 1) | |||
Length | Round Tab | Oval Tab |
inch | mm | Stainless Steel | Aluminum |
4 | 102 | 890054* | 890104* |
6 | 152 | 890056* | 890106* |
8 | 203 | 890058* | 890108* |
10 | 254 | 890060* | 890110* |
12 | 305 | 890062* | 890112* |
16 | 406 | 890066* | 890116* |
20 | 508 | 890070* | 890120* |
24 | 610 | 890074* | 890124* |
Substitute the asterist (*) with the proper hole size letter from Table 1.
Table 1 Tab Hole Size |
Tab Mounting Hole Diameter |
Inch | mm | Size Letter |
0.131 | 3.3 | P |
0.196 | 4.9 | Q |
0.257 | 6.5 | R |
0.283† | 7.1† | S |
0.320† | 8.1† | T |
0.379† | 9.6† | U |
0.406† | 10.3† | V |
0.468† | 11.8† | W |
0.515† | 13.1† | Y |
(†) These sizes only available in stainless steel round tabs.
Lanyards without Tabs | |||
Length | 2 Loops | 1 Loops (Pin) |
inch | mm | (Fig. 2) | (Fig. 3) |
4 | 102 | 890204 | 890254 |
6 | 152 | 890206 | 890256 |
8 | 203 | 890208 | 890258 |
10 | 254 | 890210 | 890260 |
12 | 305 | 890212 | 890262 |
16 | 406 | 890216 | 890266 |
20 | 508 | 890220 | 890270 |
24 | 610 | 890224 | 890274 |
Lanyard Loop/Eyelet (Fig.4) | |
For Screw Size |
#10 | M5 |
890304 | 890404 |
890306 | 890406 |
890308 | 890408 |
890310 | 890410 |
890312 | 890412 |
890316 | 890416 |
890320 | 890420 |
890324 | 890424 |
Part Numbering: Lanyards to be Supplied Separately
For lanyards with tabs, ordered separately without pins (photo page 9.22), specify the six digit pin number followed by the hole size letter from Table 1.