Subscribe to Jergens News

Metric Back Mount Ball Lock® Receiver Bushings

Two styles of receiver bushings are available. Generally, the face mount receiver bushing is utilized in blind hole applications (Slip Fit). The back mount receiver bushing is used in through hole applications (Light Press Fit). Note: Installed bushings should be approximately .012" (0.3mm) below subplate surface. See reference below for installation of back mount style bushings. Note on Installation of Back Mount Style: To alleviate the possibility of binding the shank in the bore, the maximum interference fit between bore and bushing O.D. should not exceed .0005" (0.013mm).

Click the Part Number in below chart
for Price and Stock Check.
CAD CAD Download Link

Part NumberDescriptionActual O.D. +0.04/+0.03 AShank DiameterMin. Subplate Thickness DCounter Bore CDepth +/-.025 B
49566 CAD
49567 CAD
49561 CAD
49562 CAD
49563 CAD
49564 CAD
49565 CAD

Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).