Bullet Nose Dowels
CLOSEOUT PRICING ON AVAILABLE STOCK / PRODUCT DISCONTINUATION
Dowels: Bullet nose, used for aligning two fixture pieces
Bullet Nose Dowels are used for aligning two pieces of a fixture together.
- The pin and head centric within 0.0005 TIR
- Bushing ID and OD concentric within 0.0003 TIR
- Material: Low Carbon Steel
- Heat Treat: Case hardened 72-82 R30N
- Ground Finish
- Related Products and Accessories
- Part Drawings
- Product Literature
Click the Part Number
in below chart
for Price and Stock Check.
|
| .2501 | .5017 | 5/8 | 3/8 |
| .3126 | .5017 | 5/8 | 3/8 |
| .3751 | .6267 | 3/4 | 1/2 |
| .5001 | .7518 | 7/8 | 5/8 |
Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).