877-486-1454
Home Hoist Rings & Lifting ProductsCorrosion Resistant Hoist RingsEnvirolox™ Hoist RingsEnvirolox™ Center-Pull Hoist Rings with Long U-Bar

Envirolox™ Center-Pull Hoist Rings with Long U-Bar

Jergens Envirolox™ Protective Finish is a proprietary nickel-based coating that helps to prevent rusting and other environmental hazards from affecting Jergens Hoist Rings. This coating does not contain cadmium or chromium, is environmentally friendly, and is proven to be effective in extreme conditions. It provides surface hardness, lubricity, and more effective corrosion protection than paints.
Features, Benefits, & Product Specifications:
  • Material: Alloy Steel
  • Finish: Envirolox™ Protective Coating
  • CE Certified
  • U-bar, bolt, pins, base, washer, and bushing are Magnetic Particle Inspected
  • Conforms to ASME B30.26 and MIL-STD-209K
 
Note(s): 
 
  • Metric Load Capacity: Stated load capacity based on recommended thread torques as shown in the table.
  • Torque: It is recommended that these torques be used when installing hoist rings.
  • All Metric Part No.'s: Available from stock as Standard Clevis.
  • Rated load may be reduced at 90° from vertical for:
    • Inch Part No.'s 23514-E, 23515-E, 23516-E, 23520-E, & 23521-E
    • Metric Part No.'s 23565-E, 23568-E, 23571-E, & 23574-E
 
If requesting large quantities or high volume please contact customer service via [email protected] or (866) 594-5565. For a self-service alternative, try our Quick Quote form!

Documents

Envirolox™ Center-Pull Hoist Rings with Long U-Bar

Select a part number for CAD drawings, price and stock availability.

Part Number CAD Unit Thread Size A Load Capacity Thread Length C (In) B (In) D (In) E (In) F (In) G (In) H (In) Torque (ft. lbs.) Weight (lbs) Bolt Kit Part Number
23511-E Inch 1/2-13 In 2500 lbs 3/4 6.72 1.5 0.88 0.75 3.52 4 1/4 28 2.85 23611-E
23512-E Inch 1/2-13 In 2500 lbs 1 6.72 1.5 0.88 0.75 3.52 4 1/4 28 2.87 23612-E
23513-E Inch 1/2-13 In 2500 lbs 1 1/4 6.72 1.5 0.88 0.75 3.52 4 1/4 28 2.88 23613-E
23514-E Inch 5/8-11 In 4000 lbs 1 6.72 1.5 0.88 0.75 3.52 4 3/16 60 3.05 23614-E
23515-E Inch 5/8-11 In 4000 lbs 1 1/4 6.72 1.5 0.88 0.75 3.52 4 3/16 60 2.97 23615-E
23516-E Inch 5/8-11 In 4000 lbs 3/4 6.72 1.5 0.88 0.75 3.52 4 3/16 60 2.7 23616-E
23517-E Inch 3/4-10 In 5000 lbs 1 6.72 1.5 0.88 0.75 3.52 4 100 3.06 23617-E
23518-E Inch 3/4-10 In 5000 lbs 1 1/2 6.72 1.5 0.88 0.75 3.52 4 100 3.11 23618-E
23520-E Inch 3/4-10 In 7000 lbs 1 8.11 2.31 1.4 1 5.14 4 100 7.66 23620-E
23521-E Inch 3/4-10 In 7000 lbs 1 1/2 8.11 2.31 1.4 1 5.14 4 3/8 160 7.72 23621-E
23523-E Inch 7/8-9 In 8000 lbs 1 8.11 2.31 1.4 1 5.14 4 3/8 160 7.8 23623-E
23524-E Inch 7/8-9 In 8000 lbs 1 1/4 8.11 2.31 1.4 1 5.14 4 3/8 160 7.84 23624-E
23525-E Inch 1-8 In 10000 lbs 1 1/4 8.11 2.31 1.4 1 5.14 4 3/8 230 8.05 23625-E
23526-E Inch 1-8 In 10000 lbs 1 1/2 8.11 2.31 1.4 1 5.14 4 3/8 230 8.11 23626-E
Part Number CAD Length (In) Thread Size A Load Capacity Unit Thread Length C (mm) B (mm) D (mm) E (mm) F (mm) G (mm) H (mm) Torque (Nm) Weight (kgs) Bolt Kit Part Number
23562-E M12 x 1.75 1050 kgs Metric 19 170.7 38.1 22.4 19 89.4 108 3.8 1.30 23662-E
23565-E M16 x 2.0 1900 kgs Metric 29 170.7 38.1 22.4 19 89.4 106 8.2 1.35 23665-E
23568-E M20 x 2.5 2150 kgs Metric 34 170.7 38.1 22.4 19 89.4 101 13.6 1.41 23668-E
23571-E M20 x 2.5 3000 kgs Metric 32 206 58.7 35.6 25.4 130.6 101 13.6 3.51 23671-E

Documents and Videos

  • Operating Manual
  • Operating Manual - 81600 ONLY
  • Jergens Production Vise System
  • Jergens Production Vises Features and Benefits
  • Vertical Machine Solutions
  • Horizontal Machine Solutions
  • Hydraulic Production Vises
  • Production Vises