Subscribe to Jergens News

Applications

 

 

Application Type: Milling

  • High holding- and pulling forces
  • Reducing vibrations
  • Low build in dimensions (height)
  • Correct sizes for each application
  • Suitable for vertical- and horizontal machines tools
  • Can be integrated into machine tables, plates and tombstones
  • Modules for automation available
MILLING – ZPS adaptor plate 630x800 equipped with 8 off modules K20 H.
MILLING – ZPS adaptor plate 630x800 equipped with 8 off modules K20 H.
MILLING - Clamping tower with 4 off mutiple vises clamped on ZPS plate. Changing time less than 3 minutes.
MILLING - Clamping tower with 4 off mutiple vises clamped on ZPS plate. Changing time less than 3 minutes.
MILLING - 5-axis machine equipped with ZPS Adaptor plate with 4 off K20H.
MILLING - 5-axis machine equipped with ZPS Adaptor plate with 4 off K20H.
Workpieces clamped directly by clamping pin.
Workpieces clamped directly by clamping pin.
Workpieces clamped directly by clamping pin.
Workpieces clamped directly by clamping pin.
Workpieces clamped directly by clamping pin.
Workpieces clamped directly by clamping pin.
Fixture clamped on ZPS adaptor plate.
Fixture clamped on ZPS adaptor plate.

 

 

» Back to top

 

Application Type: Welding

  • High positioning
  • High repeatability
  • Low build in dimensions
  • Air operated preferable
  • Suitable for automation
Fixture equipped with Jergens ZPS.
Fixture equipped with Jergens ZPS.
Tables equipped with ZPS modules for laser-welding.
Tables equipped with ZPS modules for laser-welding.
Tables equipped with ZPS modules for laser-welding.
Tables equipped with ZPS modules for laser-welding.

 

 

» Back to top

 

Application Type: Injection Molding

  • High holding- and pulling forces
  • Takes up the complete opening/separating forces
  • Low build in dimensions (height)
  • Suitable for vertical- and horizontal machines
  • Temperatures up to 80°C (176°F)
Clamping molds on injection molding machine
Clamping molds on injection molding machine
Clamping molds on injection molding machine
Clamping molds on injection molding machine

 

 

» Back to top

 

Application Type: Grinding

  • Cylindrical grinding
  • Achive accurate axial run-out, subsequent grinding of modules possible
  • Blow out system to prevent from grinding dust
  • Damping effect to lower vibrations
  • Fast change of equipment (magnetic chuck, vacuum plate, fixture)
Chuck clamped with ZPS on a grinding machine
Chuck clamped with ZPS on a grinding machine
Chuck clamped with ZPS on a grinding machine
Chuck clamped with ZPS on a grinding machine

 

 

» Back to top

 

Application Type: Measuring

  • High repeatability
  • Easy to clean
  • Can be installed into several materials (mineral concrete, aluminum, e.g.)
Built-in modules on a CMM machine
Built-in modules on a CMM machine

 

 

» Back to top

 

Application Type: Assembly

  • High positioning
  • High repeatability
  • Low build in dimensions
  • Air operated preferable
  • Suitable also for automation

 

 

» Back to top