Toggle Pads

"Tru-Center"

Product Photograph

Carbide Tipped Toggle Pads provide multiple point contact to compensate for surfaces that are rough or out-of-round. Points will embed themselves in the workpiece, which assures positive gripping. It eliminates possible radial load on the workpiece. Note: Metric Toggle Pads have two flats instead of a hex configuration on the head.

Material: 4140 or Carbide insert tip
Finish: Black Oxide
Heat Treat: Plain Pad Rc 36-40
Thread: 2B-UNC
Available in FixturePro Design Software and PartSpec CD

Part Number	A	B	C	D	E	Serrated
43502	1/4-20	1/2	1/2	9/16	.055	No	CAD
43503	5/16-18	9/16	11/16	5/8	.055	No	CAD
43504	3/8-16	5/8	25/32	11/16	.055	No	CAD
43505	1/2-13	3/4	7/8	13/16	.055	No	CAD
43506	5/8-11	7/8	1	15/16	.086	No	CAD
43507	3/4-10	1 1/16	1 5/32	1 1/8	.086	No	CAD
43702	1/4-20	1/2	9/16	9/16	.055	Yes	CAD
43703	5/16-18	9/16	3/4	5/8	.055	Yes	CAD
43704	3/8-16	5/8	25/32	11/16	.055	Yes	CAD
43705	1/2-13	3/4	15/16	13/16	.055	Yes	CAD
43706	5/8-11	7/8	1 1/32	15/16	.086	Yes	CAD
43707	3/4-10	1 1/16	1 1/4	1 1/8	.086	Yes	CAD
	METRIC
43552	M6x1.0	12	13	14	1.4	No	CAD
43553	M8x1.25	14	17	16	1.4	No	CAD
43554	M10x1.5	16	18	18	1.4	No	CAD
43555	M12x1.75	22	22	21	1.4	No	CAD
43556	M16x2.0	22	25	24	2.2	No	CAD
43557	M20x2.5	30	29	28	2.2	No	CAD
43752	M6x1.0	12	14	14	1.4	Yes	CAD
43753	M8x1.25	14	18	16	1.4	Yes	CAD
43754	M10x1.5	16	20	18	1.4	Yes	CAD
43755	M12x1.75	22	24	21	1.4	Yes	CAD
43756	M16x2.0	22	26	24	2.2	Yes	CAD
43757	M20x2.5	30	31	28	2.2	Yes	CAD