English
Jergens China
   Home | What's New | Contact Information | Catalog | Search | Customer Service | Site Map

Receiver Bushings, Face Mount

Product Photograph
 Product Parametric View

Two styles of receiver bushings are available. Generally, the face mount receiver bushing is utilized in blind hole applications (Slip Fit). The back mount receiver bushing is used in through hole applications (Light Press Fit).

 

Note: Installed bushings should be approximately .012" below subplate surface. See reference below for installation of back mount style bushings.

Part Number Shank Diameter (mm) Actual O.D. +.0000 -0.0004 Clearance Drill Diameter E Bore +.0005, -.0000 F Depth +.002, -.000 G Tap Size & Depth H Bolt Circle Diameter 3 PL Equally Spaced Min. Subplate Thickness D
49506 13 1.3750 11/16 1.3750 .469 8-32x5/16 .984 3/4 CAD
49507 16 1.4370 13/16 1.4370 .469 8-32x5/16 1.125 3/4 CAD
49501 20 1.6873 13/16 1.6873 .637 10-32x3/8 1.362 1 CAD
49502 25 2.0623 1 2.0623 .799 1/4-28x1/2 1.644 1 1/4 CAD
49503 30 2.2654 1-3/16 2.2654 .871 1/4-28x3/4 1.876 1 3/8 CAD
49504 35 2.6873 1-9/16 2.6873 .904 5/16-24x7/8 2.178 1 1/2 CAD
49505 50 3.4998 2-5/32 3.4998 1.239 3/8-24x1 2.916 2 CAD


Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).

This page was last updated on: 8/22/2006 4:52:00 PM