Subscribe to Jergens News

Ball Lock® Fixture Plate Machining Kit

Jergens fixture plate machining kits consist of extra-long Ball-Lock shanks and spacers. These kits allow a fixture plate to be installed on a subplate with clearance between the plates. When a user is initially building a fixture on a Ball-Lock Fixture plate, this clearance allows cutting tools to break thru the fixture plate without damaging the subplate below. The advantage of this setup is fixture plates can be machined while mounted to the same subplates they will used with in production.

  • Each Kit Includes 4 Shanks and 4 Spacers
  • Spacers thickness tolerance"
  • Additional Shanks and Spacers can be purchased separately
  • Spacers are 4140, Rc 40-45, Black Oxide Finish
  
Click the Part Number in below chart
for Price and Stock Check.

Kit Part NumberShank Dia.Spacer Dia. ASpacer Thk. BFixture Plate Thk. CShank Head Thk. DShank Head Dia. EShank Part NumberSpacer Part Number
49244
13mm1.6250.500.750.250.87
49604
49584
49249
16mm1.750.500.750.321.50
49609
49589
49242
20mm2.000.501.000.381.75
49603
49582
49243
20mm2.000.750.750.381.75
49603
49583
49253
25mm2.3750.501.000.382.00
49613
49593