Ball Lock® Shanks

Any Ball Lock® application requires at least (2) sets of shanks, receiver bushings, and liners. The liners are placed into the fixture plate to insure extremely accurate positioning. If more than (2) shanks are required (to provide additional hold down force), omit the liner bushing so that these additional holes will not interfere with your primary locating holes.
 

Features, Benefits, & Product Specifications:
  • Material: 4340 Steel
  • Finish: Black Oxide
  • Heat Treat: Shanks: 40-45 RC
  • Operating Temperature Range: -20°F to 400°F (-30°C to 200°C)
 
 
 
 
 

Ball Lock® Shanks

Select a part number for CAD drawings, price and stock availability.

Part Number CAD Unit Fixture Plate Thickness +/-0.005 (In) Shank Diameter A (mm) Head of Shank Height B (In) Head of Shank Diameter C (In) Length Under Head D (In) Maximum Hold-Down Force (lbs) Recommended Screw Torque (ft/lbs) Hex Wrench Size for Set Screw Shank Repair Kit Part Number
49601 Inch 0.75 20 0.38 1.75 1.53 3000 3 1/8 49901
49602 Inch 1.00 20 0.38 1.75 1.78 3000 3 1/8 49902
49603 Inch 1.50 20 0.38 1.75 2.28 3000 3 1/8 49903
49604 Inch 1.25 13 0.25 0.87 1.83 750 1 3/32 49904
49605 Inch 0.50 13 0.25 0.87 1.08 750 1 3/32 49905
49606 Inch 0.75 13 0.25 0.87 1.33 750 1 3/32 49906
49607 Inch 0.50 16 0.32 1.50 1.15 1200 2 1/8 49907
49608 Inch 0.75 16 0.32 1.50 1.40 1200 2 1/8 49908
49609 Inch 1.25 16 0.32 1.50 1.90 1200 2 1/8 49909
49611 Inch 0.75 25 0.38 2.00 1.70 7000 7 5/32 49911
49612 Inch 1.00 25 0.38 2.00 1.95 7000 7 5/32 49912
49613 Inch 1.50 25 0.38 2.00 2.45 7000 7 5/32 49913
49621 Inch 0.75 30 0.50 2.25 1.88 10000 12 3/16 49921
49622 Inch 1.00 30 0.50 2.25 2.13 10000 12 3/16 49922
49631 Inch 0.75 35 0.50 2.25 1.97 15500 19 1/4 49931
49632 Inch 1.00 35 0.50 2.25 2.22 15500 19 1/4 49932
49633 Inch 1.50 35 0.50 2.25 2.72 15500 19 1/4 49933
49634 Inch 2.00 35 0.50 2.25 3.22 15500 19 1/4 49934
49641 Inch 0.75 50 0.75 3.00 2.45 20000 38 3/8 49941
49642 Inch 1.00 50 0.75 3.00 2.70 20000 38 3/8 49942
49643 Inch 1.50 50 0.75 3.00 3.20 20000 38 3/8 49943
49644 Inch 2.00 50 0.75 3.00 3.70 20000 38 3/8 49944
Part Number CAD Unit Fixture Plate Thickness +/-0.13 (mm) Shank Diameter A (mm) Head Thickness B (mm) Head Diameter C (mm) Length Under Head D (mm) Maximum Hold-Down Force (kn) Recommended Screw Torque (Nm) Hex Wrench Size Repair Kit Part Number
49651 Metric 20 20 10 40 39.5 13.3 4 3 49951
49652 Metric 25 20 10 40 44.5 13.3 4 3 49952
49655 Metric 13 13 6 22 27.6 3.3 1 2.5 49955
49656 Metric 20 13 6 22 34.6 3.3 1 2.5 49956
49657 Metric 20 16 8 32 36.5 5.3 3 3 49957
49658 Metric 25 16 8 32 41.5 5.3 3 3 49958
49661 Metric 20 25 10 45 44.0 30 9 4 49961
49662 Metric 25 25 10 45 49.0 30 9 4 49962
49671 Metric 20 30 13 50 49.0 44 15 5 49971
49672 Metric 25 30 13 50 54.0 44 15 5 49972
49681 Metric 20 35 13 60 51.0 68 25 6 49981
49682 Metric 25 35 13 60 56.0 68 25 6 49982
49683 Metric 40 35 13 60 71 68 25 6 49983
49684 Metric 50 35 13 60 81.0 68 25 6 49984
49691 Metric 20 50 20 75 64.0 88 50 10 49991
49692 Metric 25 50 20 75 69.0 88 50 10 49992
49693 Metric 40 50 20 75 84.0 88 50 10 49993
49694 Metric 50 50 20 75 94.0 88 50 10 49994

Documents and Videos

  • Operating Manual
  • Operating Manual - 81600 ONLY
  • Jergens Production Vise System
  • Jergens Production Vises Features and Benefits
  • Vertical Machine Solutions
  • Horizontal Machine Solutions
  • Hydraulic Production Vises
  • Production Vises

Related Products