Subscribe to Jergens News

METRIC Stainless Steel Liners

Locating repeatability will determine if one primary and one secondary or two primary liners are needed. With two primary liners, repeatability of ±.0005 inches can be maintained if the two holes for receiver bushings are held to a centerline distance of ±.0002 inch tolerance.

  • Material: 17-4 PH Stainless Steel
  • Heat Treat: Rc 40-45
  
Click the Part Number in below chart
for Price and Stock Check.
CAD CAD Download Link

Primary Liner Part NumberFixture Plate Thickness +-0.13Shank Diameter (mm)Liner O.D. +0.00, -0.01I.D.
49755SS CAD
13.001319.04013.01
49756SS CAD
20.001319.04013.01
49757SS CAD
20.001625.04216.01
49758SS CAD
25.001625.04216.01
49751SS CAD
20.002035.04220.01
49752SS CAD
25.002035.04220.01
49761SS CAD
20.002535.04225.01
49762SS CAD
25.002535.04225.01
49771SS CAD
20.003045.04230.01
49772SS CAD
25.003045.04230.01
49781SS CAD
20.003545.04235.01
49782SS CAD
25.003545.04235.01
49783SS CAD
40.003545.04235.01
49784SS CAD
50.003545.04235.01
49791SS CAD
20.005063.54650.01
49792SS CAD
25.005063.54650.01
49793SS CAD
40.005063.54650.01
49794SS CAD
50.005063.54650.01


Secondary Liner Part NumberFixture Plate Thickness +-0.13Shank Diameter (mm)Liner O.D. +0.00, -0.01I.D.
49855SS CAD
13.001319.04013.04
49856SS CAD
20.001319.04013.04
49858SS CAD
25.001625.04216.04
49851SS CAD
20.002035.04220.04
49852SS CAD
25.002035.04220.04
49861SS CAD
20.002535.04225.04
49862SS CAD
25.002535.04225.04
49881SS CAD
20.003545.04235.04
49882SS CAD
25.003545.04235.04
49883SS CAD
40.003545.04235.04
49884SS CAD
50.003545.04235.04
49891SS CAD
20.005063.54650.04
49892SS CAD
25.005063.54650.04
49893SS CAD
40.005063.54650.04
49894SS CAD
50.005063.54650.04




Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).