Subscribe to Jergens News

METRIC Stainless Steel Ball Lock® Shanks

Any Ball Lock application requires at least two sets of shanks, receiver bushings and liners. The liners are placed into the fixture plate to insure extremely accurate positioning. If more than two shanks are required (to provide additional hold down force), omit the liner bushing so that these additional holes will not interfere with your primary locating holes.

  • Material: 17-4 PH Stainless Steel
  • Heat Treat: Rc 40-45
  
Click the Part Number in below chart
for Price and Stock Check.
CAD CAD Download Link

Part NumberDescriptionFixture Plate Thickness +/- 0.13mmShank Diameter (mm) AHead of Shank Height B (mm)Head of Shank Diameter C (mm)Length Under Head D (mm)Maximum Hold-Down Force (kN)Recommended Screw Torque (N.m))Hex Wrench Size for Set ScrewShank Repair Kit Part Number
49655SS CAD
SMBLS-13-1313.00136.0022.0027.603.312.5 
49656SS CAD
SMBLS-13-2020.00136.0022.0034.603.312.5 
49657SS CAD
SMBLS-16-2020.00168.0032.0036.505.333.0 
49658SS CAD
SMBLS-16-2525.00118.0032.0041.505.333.0 
49651SS CAD
SMBLS-20-2020.002010.0040.0039.5013.343.0 
49652SS CAD
SMBLS-20-2525.002010.0040.0044.5013.343.0 
49661SS CAD
SMBLS-25-2020.002510.0045.0044.0030.094.0 
49662SS CAD
SMBLS-25-2525.002510.0045.0049.0030.094.0 
49671SS CAD
SMBLS-30-2020.003013.0050.0049.0044.0155.0 
49672SS CAD
SMBLS-30-2525.003013.005.0054.0044.0155.0 
49681SS CAD
SMBLS-35-2020.003513.0060.0051.0068.0256.0 
49682SS CAD
SMBLS-35-2525.003513.006.0056.0068.0256.0 
49683SS CAD
SMBLS-35-4040.003513.0060.0071.0068.0256.0 
49684SS CAD
SMBLS-35-5050.003513.0060.0081.0068.0256.0 
49691SS CAD
SMBLS-50-2020.005020.0075.0064.0088.05010.0 
49692SS CAD
SMBLS-50-2525.005020.0075.0069.0088.05010.0 
49693SS CAD
SMBLS-50-4040.005020.0075.0084.0088.05010.0 
49694SS CAD
SMBLS-50-5050.005020.0075.0094.0088.05010.0 




Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).