Subscribe to Jergens News

Metric Double Acting Cylinders

Double Acting Cylinders can be used for clamping, holding, positioning, staking, punching...anywhere that a heavy duty cylinder is needed, If the cylinder is mounted in the fixture (as opposed to using mounting brackets), the fixture should be bored to between .0127 and .0245 over the "A" dimension. Doing so will prevent an out of round condition of the cylinder body which could damage the piston. They may be returned by air or by hydraulic pressure.

  • Part Drawings
  • Installation Drawings
  • Product Literature
  
Click the Part Number in below chart
for Price and Stock Check.

Operating Stroke (mm)2525
Operating Volume (cu.cm.)1851
Effective Piston Area - Push (cm2)1851
Effective Piston Area - Pull (cm2)1544
Maximum Oper. Pressure (bars)210210
Minimum Oper. Pressure (bars)1.41.4
Maximum Output Force (kg)14964218
Weight (kg)1.12


Part NumberStrokeABCDE
63117
2538.1638063M10X1.5X19
63113
2563.5638075M8X1.25X19




Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).