Subscribe to Jergens News

Metric Ball Lock Shanks

Any Ball Lock application requires at least two sets of shanks, receiver bushings and liners. The liners are placed into the fixture plate to insure extremely accurate positioning. If more than two shanks are required (to provide additional hold down force), omit the liner bushing so that these additional holes will not interfere with your primary locating holes.

    • Material: Shank/Bushing, 4340
    • Finish: Black Oxide
    • Heat Treat:
    • Shanks, RC 40-45
    • Bushings, RC 50-54
    • Liners, RC 62-64
    • Available in Hi-Temp configurations
  
Click the Part Number in below chart
for Price and Stock Check.
CAD CAD Download Link

Part NumberDescriptionFixture Plate Thickness +/-.13mmShank Diameter AHead Thickness BHead Diameter CLength Under Head DHex Wrench SizeMax Holddown Force (KN)Max Screw Torque (N.m)Rec. Holddown Force (KN)Rec. Screw Torque (N.m)Repair Kit Part Number
49655 CAD
MBLS-13-13131362227.62.53.31.22.71
49955
49656 CAD
MBLS-13-20201362234.62.53.31.22.71
49956
49657 CAD
MBLS-16-20201683236.535.34.53.53
49957
49658 CAD
MBLS-16-25251683241.535.34.53.53
49958
49651 CAD
MBLS-20-202020104039.5313.35.3104
49951
49652 CAD
MBLS-20-252520104044.5313.35.3104
49952
49661 CAD
MBLS-25-202025104544.043011239
49961
49662 CAD
MBLS-25-252525104549.043011239
49962
49671 CAD
MBLS-30-202030135049.0544183515
49971
49672 CAD
MBLS-30-252530135054.0544183515
49972
49681 CAD
MBLS-35-202035136051.0668335225
49981
49682 CAD
MBLS-35-252535136056.0668335225
49982
49683 CAD
MBLS-35-404035136071.0668335225
49983
49684 CAD
MBLS-35-505035136081.0668335225
49984
49691 CAD
MBLS-50-202050207564.01088656750
49991
49692 CAD
MBLS-50-252550207569.01088656750
49992
49693 CAD
MBLS-50-404050207584.01088656750
49993
49694 CAD
MBLS-50-505050207594.01088656750
49994




Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).