Subscribe to Jergens News

Machinable Fixture Micro™ Clamps

These clamps, with the machinable steel washers, provide more flexibility for holding round or unusual shaped parts. Parts can be held directly to the fixture plate surface. A special screw is provided to hold the washer in the proper location during machining. The flat edge is in the same location as our Micro Clamps and are used where a higher clamping surface is required.

  • Low Profile
  • Made of mild steel for machinability
  • Each package contains one machining screw
  
Click the Part Number in below chart
for Price and Stock Check.
CAD CAD Download Link

Part Number (Inch)ABCDEFG*H+Torque (Ft./Lbs)Max. Holding Force (Lbs)Replacement ScrewReplacement Washer
68620 CAD
1/4-201/80.040.980.250.470.250.3086.2800
68975
68983
68621 CAD
3/8-163/160.051.230.350.710.2750.420.82000
68976
68984
68622 CAD
1/2-135/160.11.480.450.90.30.5654000
68977
68985
68623 CAD
5/8-113/80.11.730.551.1250.350.591006000
68978
68986


Part Number (Metric)ABCDEFG*H+Torque (N.m)Max. Holding Force (N)Replacement ScrewReplacement Washer
68624 CAD
M64M1.0124.96.411.96.47.8mm8.53358
68979
68983
68625 CAD
M107M1.5231.28.918710.2mm288900
68980
68984
68626 CAD
M128M2.0337.611.422.97.612.7mm8817800
68981
68989
68627 CAD
M1612M2.5443.91428.68.915.0mm13526700
68982
68986


G* is the amount of Machinable Stock

H+ is the distance to drill & tap hole from edge of workpiece to use flat face