Subscribe to Jergens News

Inch Ball Lock Shanks

Any Ball Lock application requires at least two sets of shanks, receiver bushings and liners. The liners are placed into the fixture plate to insure extremely accurate positioning. If more than two shanks are required (to provide additional hold down force), omit the liner bushing so that these additional holes will not interfere with your primary locating holes.

  • Material: Shank/Bushing, 4340
  • Finish: Black Oxide
  • Heat Treat:
  • Shanks, RC 40-45
  • Bushings, RC 50-54
  • Liners, RC 62-64
  • Operating temperature range: -30°C to 200°C
  • DOWNLOAD Installation Instructions
  
Click the Part Number in below chart
for Price and Stock Check.
CAD CAD Download Link

Part NumberFixture Plate Thickness +/- 0.005Shank Diameter (mm) AHead of Shank Height BHead of Shank Diameter CLength Under Head DMaximum Hold-Down Force (lbs)Recommended Screw Torque (Ft/lb)Hex Wrench Size for Set ScrewShank Repair Kit Part Number
49601 CAD
.75200.381.751.53300031/8
49901
49602 CAD
1.00200.381.751.78300031/8
49902
49605 CAD
.50130.250.871.0875013/32
49905
49606 CAD
.75130.250.871.3375013/32
49906
49607 CAD
.50160.321.501.15120021/8
49907
49608 CAD
.75160.321.501.40120021/8
49908
49611 CAD
.75250.382.001.70700075/32
49911
49612 CAD
1.00250.382.001.95700075/32
49912
49621 CAD
.75300.502.251.8810000123/16
49921
49622 CAD
1.00300.502.252.1310000123/16
49922
49631 CAD
.75350.502.251.9715500191/4
49931
49632 CAD
1.00350.502.252.2215500191/4
49932
49633 CAD
1.50350.502.252.7215500191/4
49933
49634 CAD
2.00350.502.253.2215500191/4
49934
49641 CAD
.75500.753.002.4520000383/8
49941
49642 CAD
1.00500.753.002.7020000383/8
49942
49643 CAD
1.50500.753.003.2020000383/8
49943
49644 CAD
2.00500.753.003.7020000383/8
49944


Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).