Subscribe to Jergens News

Ground Rest Buttons

CLOSEOUT PRICING ON AVAILABLE STOCK / PRODUCT DISCONTINUATION

    THE CLOSEST TOLERANCES IN THE INDUSTRY! Jergens is proud of the close tolerances held on the "B" dimension of our rest buttons. When it becomes necessary through constant wear to replace rest buttons, they can be replaced with the assurance of being within .0005 (.013mm) of the original location. Where replacement is not going to be a problem, we recommend the use of the Unground Buttons, which have a +.010 (.25mm) grinding stock to be ground after the fixture is assembled.

  • Material: Ground, Low Carbon Steel Unground, 52100
  • Finish: Black Oxide
  • Heat Treat:
  • Ground, Case Hardened 75-77 R30N
  • Unground, 58-62 Rc
  • Available in FixturePro™ Design Software


  • Part Drawings
  • Product Literature
  
Click the Part Number in below chart
for Price and Stock Check.

Inch Buttons

Part NumberTypeABCD
34701
Ground3/81/415/32.1885-.188
34702
Ground3/83/819/32.1885-.188
34703
Ground3/81/223/32.1885-.188
34705
Ground1/23/827/32.251-.2505
34706
Ground1/21/231/32.251-.2505
34708
Ground5/83/827/32.376-.3755
34709
Ground5/81/231/32.376-.3755
34710
Ground5/85/81 3/32.376-.3755
34711
Ground5/83/41 7/32.376-.3755
34712
Ground7/87/161 1/32.501-.5005
34713
Ground7/85/81 7/32.501-.5005
34714
Ground7/83/41 11/32.501-.5005
34715
Ground17/161 5/32.626-.6255
34716
Ground11/21 7/32.626-.6255
34717
Ground1 1/45/81 15/32.751-.7505
34718
Ground1 1/23/41 31/321.001-1.0005


Metric Buttons

Part NumberTypeABCD
34751
Ground106125 
34754
Ground136186 
34758
Ground16102210 
34759
Ground16122510 
34763
Ground22163112 
34766
Ground25123016 




Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).